Get In Touch With Wholesale Wood Hoods

To determine if your insert will fit you must look at the interior dimensions of the hood. We use 3/4″ thick material for the construction of the hoods. To determine the interior width you would look at the size hood you are interested in and subtract 1.5″. For example, for a 48″ hood (please note total exterior width for this option is 49.5″) the interior width would be 46.5″ wide. Then you must determine the interior depth. We have three options 18″, 20.5″ or 22.5″. Make sure to purchase the option that will best accommodate your insert. You must also look at height. The apron of all of our hoods is 8-1/4″ tall. If your insert is taller than this I would recommend reaching out to us directly so we can determine if it will work.

Our hoods are made plywood with a maple veneer. We have some options that include a walnut band.

We can custom match paint to your specific color for an additional $425 on top of the raw cost of a hood. In order to do this, we require that you mail a physical sample of the color desired to our factory to be matched to. Please write your name or order number on the back of the sample.

Yes, please either call us directly or put a custom note in your order if you want to do this. Please note that our hoods are a two-piece construction to allow for easy installation. Because of this, we highly recommend installing the trim as there will be a seam between where the chimney and the apron of the hood meet.

We use 3/4″ thick trim on our hoods. To determine total exterior width you will add 1.5″ to the size hood you are interested in. For example, for a 30″ wide hood, the total exterior width will be 31.5″.

We recommend 30″-36″ between your cooktop and the bottom of the hood. Typically, if you have 8′ ceilings we would recommend a 30″ tall hood. With 9′ ceilings we recommend a 36″ tall hood and with 10′ ceilings, we recommend a 48″ tall hood

Yes, every hood is trimmable by up to 6″. You can do this yourself or we are happy to cut it down before we ship it for an additional $125. Please note that you cannot cut the hoods by more than 6″ as it will threaten the structural integrity of the hoods.